BCDVV - A-1226-B, SYNTHETIC RUBBER ADHESIVE
- MSDS: BCDVV
- Manufacturer: B F GOODRICH ENGINEERED PRODUCTS GROUP
- Product Name: A-1226-B, SYNTHETIC RUBBER ADHESIVE
- National Stock Number: 8040-00N000168
Product Identification
Product ID:A-1226-B, SYNTHETIC RUBBER ADHESIVE
MSDS Date:01/01/1985
FSC:8040
NIIN:00N000168
MSDS Number: BCDVV
Responsible Party
AKRON, OH 44318
US
Cage: GO804
Contractor
Telephone: 216-374-3000
Cage: 03481
Ingredients
HEXANE (N-HEXANE)
CAS: 110-54-3
RTECS: MN9275000
Fraction By Weight: 40.0%
OSHA PEL 500 PPM
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 40.0%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:RESPIRATORY TRACT, SKIN, EYE IRRITANT. AFFECTS
CNS.
First Aid
First Aid:EYE: FLUSH W/COPIOUS AMTS WATER 15 MIN. SKIN: REMOVE
CONTAMINATED CLOTHING, THOROUGH SOAP & WATER WASH. INHAL: REMOVE TO
FRESH AIR. GIVE ARTIFICIAL RESPIRATION/OXYGEN IF NEEDED. INGEST: DO
NOT INDUCE VOMITING. IN ALL CASES CALL MD IMMED.
Fire Fighting
Flash Point:-7.0F CC
Lower Limits:1.1
Upper Limits:7.5
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS SHOULD BE
WORN
Unusual Fire/Explosion Hazard:VAPORS MAY BUILD UP IN POORLY VENTILATED
AREA, IGNITE & CAUSE FLASH FIRE OR EXPLOSION
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. WIPE UP OR ABSORB FOR DISPOSAL.
Handling
Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINER IN
COOL DRY AREA AWAY FROM ALL SOURCES OF HEAT. AVOID SKIN & EYE
CONTACT.
Other Precautions:USE ONLY IN WELL VENTILATED AREA AWAY FROM ALL
SOURCES OF IGNITION (OPEN FLAMES, SPARKS, NON-EXPLOSION PROOF
DEVICES).
Exposure Controls
Respiratory Protection:APPROVED RESPIRATOR IF VAPORS ARE ABOVE TLV
Ventilation:SUFFICIENT TO KEEP VAPORS BELOW TLV
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:136 - 230F
Vapor Pres:119
Vapor Density:3.03
Spec Gravity:0.8780
Evaporation Rate & Reference:8.3 BU ACETATE
Appearance and Odor:SLIGHTLY VISCOUS TAN LIQUID, AROMATIC ODOR
Percent Volatiles by Volume:80.0
Stability
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
HYDROGEN CHLORIDE
Disposal
Waste Disposal Methods:SANITARY LANDFILL OR INCINERATE IN ACCORDANCE
W/LOCAL, STATE, FED REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.